Skip to content

We are talking of course about Acid Migration,
in framed artwork or documents in paper!

Acid migration happens when lignin containing paper or cardboard is used in custom framing instead of acid-free boards or foamcore.
Regular cardboard is made with wood pulp. Wood pulp contains lignin. Lignin releases harmful acids as it ages.
These acids are paper’s worst enemy, even worse than these nasty UV rays. Over time, sometimes just a few years, these acids migrate onto paper artwork or documents, causing them to turn brown and brittle, and often shows the texture of the backing cardboard, as the images below clearly show.
We received three framed engravings like the one pictured here. They were all framed about 40 years ago. The second image shows the corrugated cardboard used as backing board. The following image is after the backing board has been removed. One can clearly see the extend of the acid “burning”, the light part of the matboard is where the artwork used to be, acting as an acid barrier. The last image shows the engraving, with two different types of damages: the brown lines come from the matboard, which was also not acid free, and the darkening of the paper comes from both the lignin migration and the UV rays. One can see the difference in tone between the image, exposed to light, and the areas around it that were covered by the matboard.
If you are concerned about how well, or how badly your artwork or precious documents are protected, from light and from acid migration, take advantage of this offer: During the month of September, we offer free inspection of framed work on paper.
Give us a call at 413-529-9265 to make an appointment, or use the contact us option at the bottom of this page. This offer is valid for up to three frames.
Back To Top